JACK AND BASE PLATES
FORMWORK PRODUCTS
Safe Working Load : 90 kN, 120 kN, 135 kN
Material :Malleable Cast Iron Safe Working Load: 90 kN
Size : 120 X 120 X 5 / 10 mm. Weight : 0.520 / 1.100 Kg.
RAPID CLAMP Casted Body & Forged Wedge Ø4 - 10mm
Material: Malleable Cast Iron Accessories: 2 Pcs. Caps
Material : Malleable Cast Iron Size : 70 / 100 mm.
Material : Malleable Cast Iron Working Load : 90 KN
Material : Mild Steel
Material : Mild Steel Size : 100 / 50 mm
KWIKSTAGE SYSTEM
Size (Mtr.) 1.0 ,2.0, 2.5, 3.0
Size (Mtr.) 0.90, 1.20, 1.219, 1.294, 1.50, 2.50
Size (Mtr.) 0.90, 1.00, 1.50, 2.00, 2.50
DROP FORGED FITTINGS
A strong drop forged Coupler that connects two scaffold tubes of 48.30 OD. Providing Strength under load bearing situations joining tubes at 90° angles.
Drop Forged Girder Coupler is used in pairs to connect 48.3mm scaffold tube to an “I” beam.
Putlog Coupler is a non load bearing fitting that connects two scaffold tubes at 90 degrees to each other.
Drop Forged Swivel coupler is a Load bearing fitting design to connect two 48.3mm outside diameter scaffold tubes at any angle through 360 deg.
Double coupler is a right angle connector between two Scaffold Tubes or Scaffold Tube and Standard.
Swivel coupler is a Load bearing fitting design to connect two 48.3mm outside diameter scaffold tubes at any angle through 360 deg.
QUICK LOCK SYSTEM
.
Size (Mtr.) 1.245, 1.803, 2.413
Size (Mtr.) 0.510
PRESSED STEEL FITTINGS
The sleeve coupling transmits low to medium torque between connected equipment in shear through an blastomeric insert with male splines that mate with female hub splines.
Joint Pin is used for connecting two 48.3mm tubes end on end. This fitting is designed for use in all types of scaffolding construction and also in lighting rigs, staging and guard rails.
Double coupler is a right angle connector between two Scaffold Tubes or Scaffold Tube and Standard.
Swivel Couplers are used to connect two scaffolding poles at any angle.
Roofing coupler is designed to lock corrugated sheets with the scaffold tube without the need for holes.
Toe board Bracket is used to hold a toe board onto the base plate of the Guard rails system.
Toeboard Clamp protects your scaffold Toeboard from the uplift in construction.